AT-Mono 3/LP

Tags: audio - technica phono cartridges หัวเข็มเครื่องเล่นแผ่นเสียง

- Moving Coil Cartridge

Made specifically for mono recordings on vinyl records, the cartridge only generates signal with horizontal movement.

Made specifically for mono recordings on vinyl records, the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/LP also has an adapted vertical compliance.

Carefully selected component and state of the art technology produce a high resolution cartridge.

Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability.

The average usage time is 500 hours extending the life span of precious mono recording.

High purity PCOCC allows a more transparent signal transmission offering a high efficiency and a high fidelity. To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body.

This model is not compatible with 78rpm SP records.

Type: Moving Coil

Frequency Response: 20 to 20,000 Hz

Coil Impedance: 40 W (1 kHz)

DC Resistance: 40 W

Vertical Tracking Angle: 23 degrees

Recommended Load Impedance: 400 W to 47,000 W

Coil Inductance: 190 mH (1 kHz)

Static Compliance: 20 x 10 – 6 cm / dyne

Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)

Output Voltage: 1.2 mV (at 1 kHz, 5.0 cm/sec)

Stylus Shape: Conical Cantilever:

Stylus Construction: 0.6 mil Mount: 1/2” centers

Dimensions: 16.0 (H) x 16.6 (W) x 26.5 (L) mm

Accessories: Non magnetic screw driver; 1 brush; 2 washers; 2 x 19 mm mounting screws; 2 x 13 mm mounting screws; 2 x nuts; 1 plastic protector; 1 set of PCOCC lead wires AT6101

Price = 9,800 thb

Visitors: 146,042